92 Program features
Drive configuration and programming
The drive control program performs the main control functions, including speed,
torque and frequency control, drive logic (start/stop), I/O, feedback, communication
and protection functions. Control program functions are configured and programmed
with parameters.
Configuring via parameters
Parameters configure all of the standard drive operations and can be set via
• the control panel, as described in chapter
• the Drive composer PC tool, as described in Drive composer user's manual
(3AUA0000094606 [English]), or
• the fieldbus interface, as described in chapters
embedded fieldbus interface (EFB)
adapter.
All parameter settings are stored automatically to the permanent memory of the drive.
However, if an external +24 V DC power supply is used for the drive control unit, it is
highly recommended to force a save by using parameter
manually
before powering down the control unit after any parameter changes have
been made.
If necessary, the default parameter values can be restored by parameter
Parameter
restore.
Drive control program
Speed control
Torque control
Frequency control
Drive logic
I/O interface
Fieldbus interface
Protections
Control panel
Fieldbus control through the
and
Fieldbus control through a fieldbus
96.07 Parameter save
M
96.06