ABB ACS580 Firmware Manual page 26

22 Start-up, control with I/O and ID run
2 – Additional settings: Limits
Select Limits and press (Select) (or ).
Adjust the parameters according to your needs.
Select a parameter and press (Select).
After making the adjustments, go back to the
Primary settings menu by pressing
(Back).
3 – I/O menu
After the additional adjustments, make sure that
the actual I/O wiring matches the I/O use in the
control program.
In the Main menu, select a I/O and press
(Select) to enter the I/O menu.
Select a the connection you want to check and
press (Select) (or ).