System Info; Standard Di, Ro - ABB ACS880 Firmware Manual

No. Name/Value
107

107 System info

107.03 Rating id
-
107.04 Firmware name
-
107.05 Firmware ver
-
107.06 Loading package
name
-
107.07 Loading package
version
-
107.08 Bootloader version
107.11 Cpu usage
0 ... 100%
107.13 PU logic version
number
-
110

110 Standard DI, RO

110.01 DI status
0000h...FFFFh
110.02 DI delayed status
0000h...FFFFh
110.03 DI force selection
Bit Value
0 1 = Force DI1 to value of bit 0 of parameter
1 1 = Force DI2 to value of bit 1 of parameter
2 1 = Force DI3 to value of bit 2 of parameter
3 1 = Force DI4 to value of bit 3 of parameter
4 1 = Force DI5 to value of bit 4 of parameter
5 1 = Force DI6 to value of bit 5 of parameter
6...14 Reserved
15 1 = Force DIL to value of bit 15 of parameter
0000h...FFFFh
110.04 DI force data
0000h...FFFFh
Description
Hardware and firmware information.
All parameters in this group are read-only.
Type of the DC/DC converter unit.
Type of the DC/DC converter unit.
Firmware identification.
Firmware identification.
Version number of the firmware.
Version number of the firmware.
Name of the firmware loading package.
Name of the firmware loading package.
Version number of the firmware loading package.
Version number of the firmware loading package.
Version number of the firmware bootloader.
Microprocessor load in percent.
Microprocessor load.
The version number of the power unit FPGA logic.
The version number of the power unit FPGA logic.
Status and configuration of digital inputs and relay outputs.
Status of digital inputs DIIL and DI6...DI1.
Bits 0...5 reflect the status of DI1...DI6; bit 15 reflects the
status of the DIIL input.
Status of digital inputs.
Status of digital inputs DIIL and DI6...DI1 after any
activation/deactivation delays.
Bits 0...5 reflect the delayed status of DI1...DI6; bit 15
reflects the delayed status of the DIIL input.
Delayed status of digital inputs.
Defines how the true readings of the digital inputs can be
overridden for eg, testing purposes. A bit in parameter
110.04 DI force data is provided for each digital input, and
its value is applied whenever the corresponding bit in this
parameter is 1.
Status of digital inputs.
Defines and contains the values of digital inputs that are
used instead of the true readings if selected in parameter
110.03 DI force selection. Bit 0 is the forced value for DI1.
Forced values of digital inputs.
110.04 DI force data.
110.04 DI force data.
110.04 DI force data.
110.04 DI force data.
110.04 DI force data.
110.04 DI force data.
110.04 DI force data.
Parameters 57
Def/FbEq16
-
1 = 1
-
-
-
-
-
-
-
-
-
-
1 = 1%
-
-
-
1 = 1
-
1 = 1
0000h
1 = 1
0000h
1 = 1