Clock, Region, Display - ABB ACS580 Firmware Manual

Menu item
User sets


Clock, region, display

The Clock, region, display submenu contains settings for language, date and time,
display (such as brightness) and settings for changing how information is displayed
on screen.
The table below provides detailed information about the available setting items in the
Clock, region, display menu.
Menu item
Language
Date & time
Units
Drive name:
Contact info in fault
view
Display settings
Settings, I/O and diagnostics on the control panel 53
Description
This submenu enables you to save multiple sets of
settings for easy switching. For more information
about user sets, see
133.
Description
Change the language used on the control panel
screen. Note that the language is loaded from the
drive so this takes some time.
Set the time and date, and their formats.
Select the units used for power, temperature and
torque.
The drive name defined in this setting is shown in
the status bar at the top of the screen while using
the drive. If more than one drives are connected to
the control panel, the drive names make it easy to
identify each drive. It also identifies any backups
you create for this drive.
Define a fixed text that is shown during any fault
(for example, who to contact in case of a fault).
If a fault occurs, this information appears on the
panel screen (in addition to the fault-specific
information).
Adjust the brightness, contrast and display power
save delay of the panel screen or to invert white
and black.
User parameter sets
Corresponding
parameter
96.11 User set
save/load
96.10 User set status
on page
96.12 User set I/O mode
in1
Corresponding
parameter
96.01 Language