I/O Menu - ABB ACS580 Firmware Manual

Menu item
Reset motor data
and IR run results
Reset all parameters Restores all editable parameter values to default
Reset end user texts Restores all end user texts to default values,
Reset all to factory
defaults

I/O menu

To go the I/O menu from the Home view, select Menu - I/O.
Use the I/O menu to make sure that the actual I/O wiring matches the I/O use in the
control program. It answers the questions:
• What is each input being used for?
• What is the meaning of each output?
In the I/O menu, each row provides the following information:
• Terminal name and number
• Electrical status
• Logical meaning of the drive
Each row also provides a submenu that provides further information on the menu
item and lets you make changes to the I/O connections.
Settings, I/O and diagnostics on the control panel 55
Description
Restores all motor nominal values and motor ID
run results to default values.
values, except
• end user texts, such as customized warnings
and faults, and the drive name
• control macro selection and the parameter
defaults implemented by it
• parameter 95.02 HW options word 1
differentiated defaults implemented by it.
including the drive name, contact info, customized
fault and warning texts, PID unit and currency unit.
Restores all drive parameters and settings back to
initial factory values, except
• parameter 95.02 HW options word 1
differentiated defaults implemented by it.
Corresponding
parameter
96.06 Parameter
restore, selection
motor data
96.06 Parameter
restore, selection
all
and the
96.06 Parameter
restore, selection
end user texts
96.06 Parameter
restore, selection
factory defaults
and the
Reset
Clear
Reset
All to