Group 09 System Info; Group 08 Alarms & Faults - ABB ACSM1 Firmware Manual

Group 08 ALARMS & FAULTS
08
8.01 ACTIVE FAULT
Fault code of the latest (active) fault.
8.02 LAST FAULT
Fault code of the 2nd latest fault.
8.03 FAULT TIME HI
Time (real time or power-on time) at which the active fault occurred in format dd.mm.yy
(=day.month.year).
8.04 FAULT TIME LO
Time (real time or power-on time) at which the active fault occurred in format hh.mm.ss
(hours.minutes.seconds).
8.05 ALARM LOGGER 1
Alarm logger 1. For possible causes and remedies, see chapter
entering a 0.
Bit
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
FW block:
FW block:
FW block:
FW block:
FW block:
Alarm
BRAKE START TORQUE
BRAKE NOT CLOSED
BRAKE NOT OPEN
SAFE TORQUE OFF
STO MODE CHANGE
MOTOR TEMP
EMERGENCY OFF
RUN ENABLE
ID-RUN
EMERGENCY STOP
POSITION SCALING
BR OVERHEAT
BC OVERHEAT
DEVICE OVERTEMP
INTBOARD OVERTEMP
BC MOD OVERTEMP
FAULT FUNCTIONS (page 163)
FAULT FUNCTIONS (page 163)
FAULT FUNCTIONS (page 163)
FAULT FUNCTIONS (page 163)
FAULT FUNCTIONS (page 163)
Fault
Parameters and firmware blocks
tracing. Can be reset by
81