Operation Mode - ABB ACS580 Firmware Manual

No. Name/Value
19

19 Operation mode

19.01 Actual operation
mode
Zero
Speed
Torque
Min
Max
Add
Scalar (Hz)
Forced magn.
19.11 Ext1/Ext2 selection
EXT1
EXT2
FBA A MCW bit 11
DI1
DI2
DI3
DI4
DI5
DI6
Timed function 1
Timed function 2
Timed function 3
Supervision 1
Supervision 2
Supervision 3
EFB MCW bit 11
Other [bit]
Description
Selection of local and external control location sources and
operating modes.
See also section Operating modes of the drive
Displays the operating mode currently used.
See parameters 19.11...19.14.
This parameter is read-only.
None.
Speed control (in vector motor control mode).
Torque control (in vector motor control mode).
The torque selector is comparing the output of the speed
controller (25.01 Torque reference speed
reference (26.74 Torque ref ramp
two is used (in vector motor control mode).
The torque selector is comparing the output of the speed
controller (25.01 Torque reference speed
reference (26.74 Torque ref ramp
two is used (in vector motor control mode).
The speed controller output is added to the torque reference
(in vector motor control mode).
Frequency control in scalar motor control mode (in scalar
motor control mode).
Motor is in magnetizing mode.
Selects the source for external control location EXT1/EXT2
selection.
0 = EXT1
1 = EXT2
EXT1 (permanently selected).
EXT2 (permanently selected).
Control word bit 11 received through fieldbus interface A.
Digital input DI1 (10.02 DI delayed
Digital input DI2 (10.02 DI delayed
Digital input DI3 (10.02 DI delayed
Digital input DI4 (10.02 DI delayed
Digital input DI5 (10.02 DI delayed
Digital input DI6 (10.02 DI delayed
Bit 0 of 34.01 Combined timer status
Bit 1 of 34.01 Combined timer status
Bit 2 of 34.01 Combined timer status
Bit 0 of 32.01 Supervision status
Bit 1 of 32.01 Supervision status
Bit 2 of 32.01 Supervision status
Control word bit 11 received through the embedded fieldbus
interface.
Source selection (see Terms and abbreviations
Parameters 173
(page 89).
control) and torque
out) and the smaller of the
control) and torque
out) and the greater of the
status, bit 0).
status, bit 1).
status, bit 2).
status, bit 3).
status, bit 4).
status, bit 5).
(see page 240).
(see page 240).
(see page 240).
(see page 234).
(see page 234).
(see page 234).
on page 136). -
Def/FbEq16
-
1
2
3
4
5
6
10
20
EXT1
0
1
2
3
4
5
6
7
8
19
20
21
25
26
27
32