Display Lldp Status - H3C MSR Series Command Reference Manual

Field
LLDP neighbor information last change time
The number of LLDP neighbor information inserted
The number of LLDP neighbor information deleted
The number of LLDP neighbor information dropped

display lldp status

Use display lldp status to display LLDP status information of a port.
Syntax
display lldp status [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no port is specified, this command displays the global LLDP status and the LLDP status information
for all ports.
Examples
# Display the global LLDP status and the LLDP status information of all ports.
<Sysname> display lldp status
Global status of LLDP: Enable
The current number of LLDP neighbors: 0
The current number of CDP neighbors: 0
LLDP neighbor information last changed time: 0 days,0 hours,4 minutes,40 seconds
Transmit interval
Hold multiplier
Reinit delay
Transmit delay
Trap interval
Fast start times
Port 1 [Ethernet1/1]:
Port status of LLDP
Description
Time the neighbor information was last updated.
Number of times of adding neighbor information.
Number of times of removing neighbor information.
Number of times of dropping neighbor information
due to lack of available memory space.
: 30s
: 4
: 2s
: 2s
: 5s
: 3
: Enable
137