Table of Contents
Advertisement
Spring Upper Seat Removal and Installation
REMOVAL
1) Remove coil spring referring to "Coil Spring Removal and
Installation" in this section.
2) Remove spring upper seat (1).
INSTALLATION
1) Install spring upper seat (1).
NOTE:
For proper installing direction of spring upper seat (1),
refer to the figure.
A : Vehicle body side (Upper side)
2) Install coil spring referring to "Coil Spring Removal and
Installation" in this section.
Trailing Arm Removal and Installation
REMOVAL
1) Hoist vehicle and remove rear wheel referring to "Wheel
Removal and Installation" in Section 3F.
2) Support rear axle (or axle housing) (1) by using floor jack (2).
CAUTION:
Never apply floor jack against lateral rod as it may get
deformed.
REAR SUSPENSION 3E-13
Advertisement
Table of Contents
