Suzuki Ignis Service Manual page 2585

6A3-44 ENGINE MECHANICAL (Z13DT ENGINE)
Camshaft Housing Components
1
4
6
5
1. Camshaft housing
2. Camshaft housing bolt
: Tighten 18 N·m (1.8 kg-m, 13.0 lb-ft)
by the specified procedure
3. Camshaft housing stud bolt
: Tighten 25 N·m (2.5 kg-m, 18.0 lb-ft)
by the specified procedure
4. Camshaft timing sprocket
5. Camshaft timing sprocket bolt
: Tighten 120 N·m (12.0 kg-m, 87.0 lb-
ft) by the specified procedure
6. Washer
Oil Pump
Check rotor turn smoothly by hand.
If rotors is not smoothly, replace timing chain cover.
2
3
7. Camshaft housing gasket
8. Intake manifold side camshaft
9. Exhaust manifold side camshaft
10. Intake manifold side camshaft gear
11. Exhaust manifold side camshaft gear
12. Camshaft gear bolt
7
13
14
: Apply engine oil to sliding surface
: Apply engine oil to sliding surface
: Apply engine oil to gear
: Apply engine oil to gear
: Tighten 120 N·m (12.0 kg-m, 87.0 lb-ft)
by the specified procedure
10
8
9
13. Cylinder head
14. Knock pin
Tightening torque
Do not reuse.
12
11