Table of Contents
Advertisement
1
3
2
(A)
3
1
5
2
(A)
3, (b)
2) Install special tools (A) as follows.
a) Align camshaft housing plug hole (1) with camshaft gap (2)
(A)
b) Lock camshafts (3) inserting special tools (A) to plug holes.
Special tool
(A): 09917-68610
(A)
3
3) Install intake manifold side camshaft gear (1) and exhaust
manifold side camshaft gear (2) to camshaft housing, and
tighten camshaft gear bolts (3) by hand.
NOTE:
Be sure to differentiate intake and exhaust side camshaft
gears by punched marks shown in figure.
3, (a)
4. "IN" mark
5. "EX" mark
2
4
1
4) Tighten camshaft timing sprocket bolt and camshaft gear
bolts as follows.
a) Lock camshaft timing sprocket (1) using special tool.
1
Special tool
2, (a)
(A): 09917-68221
b) Install camshaft timing sprocket (1) and tighten camshaft
Tightening torque
Camshaft timing sprocket bolt
(a): 120 N·m (12.0 kg-m, 87.0 lb-ft) by the specified proce-
dure
c) Tighten exhaust manifold side camshaft gear bolt (3) then
Tightening torque
Camshaft gear bolt
(b): 120 N·m (12.0 kg-m, 87.0 lb-ft) by the specified proce-
4, (b)
dure
ENGINE MECHANICAL (Z13DT ENGINE) 6A3-49
turning intake manifold side and exhaust manifold side
camshaft as shown in figure.
timing sprocket bolt (2) to specified torque.
intake manifold side camshaft gear bolt (4).
Advertisement
Table of Contents
