Table of Contents
Advertisement
1
2
3
21) Remove engine rear mounting bolts (1), engine left mounting
nuts (2) and engine right mounting bracket bolts (3).
22) Before removing engine with transaxle from vehicle, recheck
to make sure all hoses, electric wires and cables are discon-
nected from engine and transaxle.
23) Lower engine with transaxle from vehicle.
NOTE:
Before lowering engine, to avoid damage to A/C com-
pressor, raise it through clearance made on engine
crankshaft pulley side. At this time, use care so that no
excessive force is applied to hoses.
24) Disconnect transaxle from engine referring to "Transaxle
Unit Dismounting and Remounting" in Section 7A3.
25) Remove clutch cover and clutch disc referring to "Clutch
Cover, Clutch Disc and Flywheel Removal and Installation"
in Section 7C3.
ENGINE MECHANICAL (Z13DT ENGINE) 6A3-29
Advertisement
Table of Contents
