Table of Contents
Advertisement
BRAKE SHOE
Brake shoe thickness (wear)
Where lining is worn out beyond service limit, replace shoe.
Thickness (lining + shoe rim)
Standard: 6.4 mm (0.25 in.)
Service limit: 3.6 mm (0.14 in.)
If one of brake linings is to service limit, all linings must be
replaced at the same time.
CAUTION:
Never polish lining with sandpaper. If lining is polished
with sandpaper, hard particles of sandpaper will be
deposited in lining and may damage drum. When it is
required to correct lining, replace it with a new one.
WHEEL CYLINDER
Visually inspect wheel cylinder for brake fluid leakage.
PARKING SHOE LEVER
Inspect brake shoe lever for smooth movement along shoe rim. If
defective, correct or replace.
BRAKE ADJUSTER (STRUT) AND ADJUSTER ACTUATOR
Check ratchet (1) of adjuster and adjuster actuator (2) for opera-
tion, wear or damage.
PARKING AND REAR BRAKE 5C-9
Advertisement
Table of Contents
