Table of Contents
Advertisement
2
1
4) From the position where contact coil became unable to turn
any further (it stopped), turn it back clockwise about two and
a half rotations and align center mark with alignment mark
(1).
Contact Coil Cable Assembly Removal and
Installation
CAUTION:
Do not turn contact coil more than allowable number of
turns (about two and a half turns from the center position
clockwise or counterclockwise respectively), or coil will
break.
REMOVAL
1) Disconnect negative battery cable at battery terminal.
2) Disable air bag system. Refer to "Disabling air bag system"
in Section 10B.
3) Remove steering wheel from steering column. Refer to
"Steering Wheel Removal and Installation" in this section.
4) Remove dash side trim (1) and steering column hole cover
(2).
5) Remove steering column lower cover (2) and upper cover
(1).
STEERING WHEEL AND COLUMN 3C-8
Advertisement
Table of Contents
