Table of Contents
Advertisement
5B-2 FRONT BRAKE
Front Brake Component Location
CAUTION:
Lubricate parts as specified. Do not use lubricated shop air on brake parts as damage to rubber com-
ponents may result. If any component is removed or line disconnected, bleed the brake system.
Replace pads in axle sets only. The torque values specified are for dry, unlubricated fasteners.
1. Guiding pin
1-1. Locking pin:
Apply specified rubber grease to guiding and locking pins surfaces for
smooth movement.
2. Pin boot
2-1. Rubber tube
3. Disc brake caliper (disc brake cylinder)
4. Piston seal
5. Disc brake piston
General Description
6. Piston boot
7. Disc brake pad
8. Pad spring
9. Brake caliper carrier
10. Caliper bolt
11. Bleeder plug
12. Bleeder plug cap
13. Caliper pin bolt
14. Flexible hose bolt
15. Blank
16. Brake disk
17. Brake disk screw
Tightening torque
Do not reuse
Advertisement
Table of Contents
