Table of Contents
Advertisement
2) Remove piston boot (1) prying it with a metal tool (2) (no
sharp edge).
CAUTION:
Be careful not to damage inside (bore side) of cylinder.
3) Remove piston seal using a thin blade like a thickness
gauge, etc.
CAUTION:
Be careful not to damage inside (bore side) of cylinder.
ASSEMBLY
Reassemble front brake in reverse order of disassembly, noting
the following points.
CAUTION:
• Wash each part cleanly before installation in the same
fluid as the one used in master cylinder reservoir.
• Never use other fluid or thinner.
• Before installing piston and piston seal to cylinder,
apply fluid to them.
• After reassembling brake lines, bleed air from them.
FRONT BRAKE 5B-9
Advertisement
Table of Contents
