Table of Contents
Advertisement
Fuel Pump On-Vehicle Inspection
Refer to "Fuel Delivery System" and/or "Fuel pump with pressure
regulator on-vehicle inspection" in Section 6E1.
Fuel Pump Assembly Removal and Installa-
tion
WARNING:
Before starting the following procedure, be sure to
observe "Precautions" in this section.
Removal
1) Remove fuel tank from vehicle referring to "Fuel Tank
Removal and Installation" in this section.
2) Disconnect fuel breather hose (1), fuel vapor hose (2) and
pipes from fuel pump assembly (4).
When disconnecting joint of fuel feed line (3) from pipe,
unlock joint by inserting special tool between pipe and joint
lock first.
Special tool
(A) : 09919-47020
3) Remove fuel pump assembly (1) from fuel tank (2).
1
2
Installation
CAUTION:
When connecting joint, clean outside surface of pipe
where joint is to be inserted, push joint into pipe till joint
lock clicks and check to ensure that pipes are connected
securely, or fuel leak may occur.
ENGINE FUEL 6C-11
Advertisement
Table of Contents
