Table of Contents
Advertisement
6A1-48 ENGINE MECHANICAL (M13 ENGINE)
1
3
10) Apply engine oil to timing chain and then turn crankshaft
1
2
11) Install timing chain cover referring to "Timing Chain Cover
12) Perform Steps 3) to 8) of "Installation" of "Timing Chain
4
Timing Chain and Timing Chain Tensioner
Inspection
Timing chain tensioner
Crankshaft timing sprocket
clockwise by 2 revolutions and check that match marks (1)
on intake and exhaust camshaft timing sprockets are in
match with notches (2) on cylinder head and key (3) is in
match with notch (4) on cylinder block as shown in figure.
If each marking chain and each match mark are no matches,
adjust each sprockets and timing chain.
Removal and Installation" in this section.
Cover Removal and Installation" in this section.
• Check shoe (1) for wear or damage.
• Check teeth of sprocket for wear or damage.
Advertisement
Table of Contents
