Table of Contents
Advertisement
6B3-10 ENGINE COOLING (Z13DT ENGINE)
For RB413D
[A]: Forward
1. Radiator assembly
2. Hose clip
Be sure to position clip in specified direc-
tion as shown in figure.
3. Radiator cooling fan assembly
4. Radiator inlet hose
Be sure to connect hose aligning hose
mark with stopper.
5. Radiator outlet hose
Be sure to connect hose aligning hose
mark with stopper.
6. Radiator to degassing tank hose
7. Degassing tank cap
8. Degassing tank
9. Reservoir tank vent pipe hose
10. Water engine outlet hose
11. Degassing tank outlet hose
12. Degassing tank bracket
13. Heater outlet No.2 hose
14. Thermostat case assembly
: Do not disassemble
15. Heater outlet pipe
16. Heater outlet No.1 hose
17. Heater inlet hose
18. To engine side
19. To heater side
20. Thermostat case bolt
21. O-ring
22. ECT sensor
For detail of servicing, refer to "Engine
coolant temperature sensor (ECT sen-
sor) removal and installation" and
"Engine coolant temperature sensor
(ECT sensor) inspection" in Section 6E3.
Do not reuse.
Tightening torque
Advertisement
Table of Contents
