Table of Contents
Advertisement
Reassembly
1) Install valve spring seats to cylinder head.
2) Install new valve stem seal (1) to valve guide.
After applying engine oil to seal and spindle of special tool
(valve guide installer handle), fit stem seal to spindle, and
then install seal to valve guide by pushing special tool by
hand.
(A)
After installing, check to be sure that seal is properly fixed to
valve guide.
(B)
CAUTION:
When installing, never tap or hit special tool with a ham-
1
mer or the like. Install seal to guide only by pushing spe-
cial tool by hand. Tapping or hitting special tool may
cause damage to seal.
NOTE:
Do not reuse once-disassembled seal. Be sure to install
new seal.
Special tool
(A): 09916-58210
(B): 09917-98221
3) Apply engine oil to stem seal, valve guide bore and valve
stem, and then install valve to valve guide.
4) Install valve spring and valve spring retainer.
5) Using special tool (A) and (B), compress valve spring. And,
fit two valve cotters (1) into groove in valve stem using spe-
cial tool (C).
Special tool
(A): 09916-14510
(B): 09916-14521
(C): 09916-84511
ENGINE MECHANICAL (Z13DT ENGINE) 6A3-59
Advertisement
Table of Contents
