Suzuki Ignis Service Manual page 2834

Manual Transmission Oil Inspection
1) Inspect transmission case for evidence of oil leakage.
Repair leaky point if any.
2) Make sure that vehicle is placed level for oil level check.
3) Remove oil filler/level plug (1) of transmission.
4) Check oil level.
Oil level can be checked roughly by means of filler/level plug
hole. That is, if oil flows out of level plug hole or if oil level is
found up to hole when level plug is removed, oil is properly
filled.
If oil is found insufficient, pour specified oil up to level hole.
For specified oil, refer to "Manual Transaxle Oil Change" in
Section 7A.
5) Apply sealant to filler/level plug and tighten it to specified
torque.
Manual Transmission Oil Replacement
1) Place the vehicle level and drain oil by removing drain plug
(2).
2) Apply sealant to drain plug after cleaning it and tighten drain
plug to specified torque.
3) Pour specified oil up to level hole.
4) Tighten filler plug to specified torque.
For recommended oil, its amount and tightening torque data,
refer to "Manual Transaxle Oil Change" in Section 7A.
Transfer Oil (4WD) and Rear Differential Oil
(4WD) Inspection
1) Check transfer case or differential for evidence of oil leak-
age.
Repair leaky point if any.
2) Make sure that vehicle is placed level for oil level check.
3) Remove level plug of transfer or differential and check oil
level.
Oil level can be checked roughly by means of level plug
hole. That is, if oil flows out of level plug hole or if oil level is
found up to hole when level plug is removed, oil is properly
filled.
If oil is found insufficient, pour specified amount of specified
oil referring to "Transfer Oil Change" in Section 7D or "Rear
Differential Gear Oil Change" in Section 7F.
[A] : Transfer
[B] : Rear differential
1. Oil level/filler plug
2. Drain plug
4) Tighten level plug to specified torque referring to "Transfer
Oil Change" in Section 7D or "Rear Differential Gear Oil
Change" in Section 7F.
MAINTENANCE AND LUBRICATION 0B-15