Table of Contents
Advertisement
ASSEMBLY
For assembly, reverse disassembly procedure, noting the follow-
ing instructions.
• Apply grease to bearing seal, strut bearing and sliding part of
strut rod.
• Mate spring end with stepped part (3) of spring lower seat (2)
as shown.
• Install spring seat on coil spring and then spring upper seat
(1) aligning "OUT" mark (4) on spring upper seat and center
of strut bracket (5).
• Install bearing spacer, bearing, bearing seal, strut support
and strut unit in this sequence.
• Tighten strut nut temporarily at this step.
Special tool
(A) : 09900-00411
(B) : 09900-00414
(C) : 09945-26010
FRONT SUSPENSION 3D-9
Advertisement
Table of Contents
