Table of Contents
Advertisement
5B-10 FRONT BRAKE
Piston Seal, Piston and Boot
NOTE:
Piston seal is used to seal piston and cylinder and to
adjust clearance between pad and disc. Replace with a
new one at every overhaul.
1) Fit piston seal into groove in cylinder taking care not to twist
it.
2) Fit new boot (2) in groove (3) of piston (1) facing stepped
end (4) of boot to groove side.
3) Insert piston into cylinder by hand.
4) Drive in boot (1) into cylinder till its end surface becomes
flush with cylinder end surface using special tools.
Special tool
(A): 09924-74510
(B): 09944-88210
Advertisement
Table of Contents
