Table of Contents
Advertisement
Installation
1) Install fuel tank inlet valve (1) to fuel tank.
2) Install fuel filler hose (1) to fuel tank and secure it with clamp
(2).
For proper installation, refer to "Fuel System Components" in
this section.
3) Lower vehicle and install fuel filler cap.
Fuel Tank Inlet Valve Inspection
Check fuel tank inlet valve (1) for the following.
• Damage
• Smooth opening and closing
If any damage or malfunction is found, replace.
Fuel Tank Removal and Installation
Removal
WARNING:
• Before starting the following procedure, be sure to
observe "Precautions" in this section.
• A small amount of fuel may be released after the fuel
hose is disconnected. In order to reduce the chance of
personal injury, cover the hose and pipe to be discon-
nected with a shop cloth. Be sure to put that cloth in an
approved container when disconnection is completed.
1) Relieve fuel pressure in fuel feed line according to "Fuel
pressure relief procedure" in Section 6.
2) Disconnect negative cable at battery.
3) Hoist vehicle.
ENGINE FUEL 6C-7
Advertisement
Table of Contents
