Table of Contents
Advertisement
Brake Booster Components Locator
1. Brake master cylinder assembly
2. Brake booster assembly
3. Gasket
4. Push rod clevis
5. Nut
6. Clevis pin:
Apply SUZUKI SUPER GREASE A
99000-25010 to clevis pin.
Brake Booster Removal and Installation (for
LH Model)
CAUTION:
• Never disassemble brake booster. Disassembly will
spoil its original function. If it is found faulty, replace it
with new one.
• Observe CAUTION at the beginning of On-Vehicle Ser-
vice.
REMOVAL
1) Remove master cylinder assembly, referring to "Master Cyl-
inder Removal and Installation (for LH Model)" in this sec-
tion.
2) Disconnect brake vacuum hose from brake booster.
3) Disconnect push rod clevis (1) from brake pedal arm (2).
4) Remove attaching nuts (3) and then booster.
BRAKES PIPE / HOSE / MASTER CYLINDER 5A-21
7. Clip
8. Nut
9. Brake vacuum hose
Tightening torque
Do not reuse
Advertisement
Table of Contents
