Table of Contents
Advertisement
ECM registration
Procedure after ECM replacement
1) Connect SUZUKI scan tool to DLC.
2) Register the following information for ECM referring to "SUZUKI Scan Tool Operator's Manual".
• Fuel injector calibration code
• Vehicle variant (vehicle configuration (equipment such as ABS and A/C))
3) Using SUZUKI scan tool, register secret key code (SKC) and password for immobilizer system referring to
"SUZUKI Scan Tool Operator's Manual".
4) Check for registration data referring to "Registration data check" in this section.
Procedure after fuel injector replacement
1) Connect SUZUKI scan tool to DLC.
2) Register the calibration code of the fuel injector, which is newly installed, for ECM referring to "SUZUKI Scan
Tool Operator's Manual".
3) Check for registration data referring to "Registration data check" in this section.
ENGINE AND EMISSION CONTROL SYSTEM (Z13DT ENGINE) 6E3-29
Advertisement
Table of Contents
