Table of Contents
Advertisement
3
2
3
1
14) Remove oil return pipe (1) from turbocharger.
Installation
NOTE:
Clean mating surfaces of turbocharger, catalytic con-
verter and exhaust manifold.
1) Install oil return pipe (1) with new gasket to turbocharger.
Tightening torque
Oil return pipe bolt (a): 9 N·m (0.9 kg-m, 6.5 lb-ft)
2) Install new gasket, catalytic converter (1) and new lock plate
(2) to turbocharger.
Tightening torque
Catalytic converter bolt (a): 25 N·m (2.5 kg-m, 18.0 lb-ft)
3) Bend claws (3) of lock plate (1) to prevent catalytic converter
bolt (2) from loosening.
3
ENGINE MECHANICAL (Z13DT ENGINE) 6A3-13
Advertisement
Table of Contents
