Table of Contents
Advertisement
6A3-18 ENGINE MECHANICAL (Z13DT ENGINE)
Exhaust Manifold Components
7
1. Exhaust manifold cover
2. Exhaust manifold gasket
3. Exhaust manifold
6
9 N·m (0.9 kg-m)
7
5
23 N·m (2.3 kg-m)
4. Engine hanger nut
5. Exhaust manifold nut
6. Exhaust manifold cover nut
7. Stud bolt
8. Engine hanger
Exhaust Manifold Removal and Installation
Removal
WARNING:
To avoid danger of being burned, do not service exhaust
system while it is still hot. Service should be performed
after system cools down.
1) Disconnect negative (–) cable at battery.
2) Drain engine coolant referring to "Cooling System Flush and
Refill" in Section 6B3.
3) Remove air cleaner assembly with MAF sensor assembly
referring to "Air Cleaner Assembly Removal and Installation"
in this section.
4) Remove turbocharger referring to "Turbocharger Removal
and Installation" in this section.
1
2
3
7
8
4
Tightening torque
Do not reuse.
Advertisement
Table of Contents
