Suzuki Ignis Service Manual page 2784

3
6
Clutch Cover Inspection
Clutch cover
1) Check diaphragm spring (1) for abnormal wear or damage.
2) Inspect pressure plate (2) for wear or heat spots.
3) If abnormality is found, replace clutch cover. Do not disas-
semble it into diaphragm spring (1) and pressure plate (2).
Clutch Release Mechanism Removal and
Installation
Removal
1) Remove clutch release fork bolt (1) and then drive out clutch
5
2 release shaft (2).
2) Remove release shaft bearing (3) and clutch release fork (4).
3) Drive out clutch release shaft No.1 bush (5) and clutch
1
release shaft No.2 bush (6) from transaxle case.
4
4) Remove cluster gear cover (1).
1
CLUTCH (Z13DT ENGINE MODEL) 7C3-11