Table of Contents
Advertisement
5A-12 BRAKES PIPE / HOSE / MASTER CYLINDER
1
Master Cylinder Components
Left-hand Steering Vehicle
1. Master cylinder body
2. Grommet:
:Apply brake fluid.
INSTALLATION
2
3
13 N·m (1.3 kg-m)
3. O-ring
4. Pin washer retainer (with ABS)
1) Apply brake fluid to new grommets and attach grommets (2)
to master cylinder (1).
NOTE:
Be sure to use new grommets.
2) Install reservoir (2) to master cylinder and insert retainer (1).
3) Install master cylinder referring to "Master Cylinder Removal
and Installation (for RH Model)" in this section.
4) Fill reservoir with specified brake fluid up to MAX mark on it.
5) After installation, bleed air from system and check for brake
fluid leakage.
5
2
4
1
5. Reservoir
Tightening torque
Do not reuse
Advertisement
Table of Contents
