Suzuki Ignis Service Manual page 2751

7A3-18 MANUAL TRANSAXLE (Z13DT ENGINE MODEL)
(B)
(A)
1) Remove bearing plate case bolt (1) and then detach trans-
1
2
1
2) Remove 5th gear pawl (1) from extension bearing plate case
3, (a)
2
1
3) Remove gear shift rod locking bushes (1) from extension
1
2
4) Remove gear shift rod connector bolt (1).
2
5) Engage 2nd, 3rd and 5th gear and then remove gear shift
1
mission end plate (2) from transaxle case.
(2).
NOTE:
If fastening bolts are stiff, heat extension bearing plate
case with hot air dryer to approx. 80 °C (176 °F).
3. 5th gear pawl bolt
bearing plate case (2) using special tools.
Special tool
(A): 09922-48620
(B): 09922-48610
rod connector (2).
NOTE:
If fastening bolts are stiff, heat extension bearing plate
case with hot air dryer to approx. 80 °C (176 °F).