Chrysler Conquest 1988 Service Manual page 37

BODY
- Troubleshooting
OPERATION
l
When the ignition switch is turned to 7iON",
current flows through fuse No. 13, the power
window relay (coil), and ground, closing the
power window relay contacts.
l
When the power window switch is set at the
"UP" or "DOWN" position with the ignition
switch turned to "ON", current flows through
the power window relay (contact), the power
window switch, and ground, and the power
window motor revolves to raise or lower the
door window glass.
l
If the lock switch of the power window main
switch block is set at "ON", however, the door
window glass can neither be raised nor lowered
by operating the sub switches.
l
For operation of the power window timer, refer
to GROUP 8 ELECTRICAL - ETACS.
TROUBLESHOOTING HINTS
1.
2.
3.
The door windows cannot be operated by using
the main switches.
l
Malfunctioning main switch
The door windows can be operated by using the
main switches, but cannot be operated byusing
the sub switches.
l
Malfunctioning sub switch
The door windows can be operated (by using the
sub switches) even though the lock switch is at
"ON".
l
Malfunctioning main switch lock