Installation and configuration
An in-depth discussion of these commands follows, along with an example of the on-screen
response generated by each. Our discussion will begin with the HELP command, which
generates a listing of the nine basic commands:
HELP (HE, ?)
If you enter ?, MMI will list available commands along with an explanation of their usage. The
help screen can be made to appear by entering ?, HE, or HELP. Entering any of these
commands causes a screen similar to the following to appear:
Figure 12: HELP (H) screen
Note:
The FIRMWARE and ESAM SAVE commands are reserved for future use.
ALARM [ENABLE | DISABLE]
ALARM ENABLE (A E)
This command allows MCR to activate system alarm relay output to respond to any active
alarm condition. Its display is similar to
page 76.
Figure 13: ALARM ENABLE (A E) screen
76
Mini-Carrier Remote Fundamentals
Figure 13: ALARM ENABLE (A E) screen
Comments? infodev@avaya.com
on
March 2013