Checking clock synchronization
To check clock synchronization:
1. Type status sync and press Enter to verify that the clock synchronization is good.
2. Make sure the Switching Capabilities field shows enabled.
Note:
Because of a change in Release 1.3 of the Avaya Communication Manager, you
Note:
do not need to disable Terminal Translation Initialization (TTI) before an upgrade
or migration or enable it afterwards.
Disabling scheduled maintenance
To prevent scheduled daily maintenance from interfering with the upgrade:
1. Type change system-parameters maintenance and press Enter.
2. If scheduled maintenance is in progress, set the Stop Time field to 1 minute after the
current time.
or
If scheduled maintenance is not in progress, set the Start Time field to a time after the
upgrade will be completed.
For example, if you start the upgrade at 8:00 P.M. and the upgrade takes 90 minutes, set
the Start Time field to 21:30.
On the active S8700 Media Server
Issue 4 January 2005
163