Automatic Fault Resets - ABB ACQ580 Firmware Manual

Pump control program

Hide thumbs Also See for ACQ580:

Table of Contents

Automatic fault resets

The drive can automatically reset itself after overcurrent, overvoltage, undervoltage

and external faults. The user can also specify a fault that is automatically reset.

By default, automatic resets are off and must be specifically activated by the user.

WARNING! Before you activate the function, make sure that no dangerous

situations can occur. The function resets the drive automatically and continues

operation after a fault.

• Menu - Primary settings - Fault functions - Autoreset faults

• Parameters

31.12...31.16

Program features 91