Multipump Configuration - ABB ACQ580 Firmware Manual

256 Parameters
No. Name/Value
76
76 Multipump
configuration
76.01 PFC status
Bit Name
0 PFC 1 running
1 PFC 2 running
2 PFC 3 running
3 PFC 4 running
4 PFC 5 running
5 PFC 6 running
6...15 Reserved
0000h...FFFFh
76.02 Multipump system
status
76.05 Measured level
0.00...32767.00 m
76.06 Measured level %
0...100 %
76.07 LC speed ref
-2147483648...
2147483648 rpm
Description
Multipump configuration parameters.
See sections Intelligent pump control (IPC)
pump control (PFC) (page 63) and
Note: Parameters are dynamically hidden based on selection
of pumping mode (76.21 Multipump
number of motors (76.25 Number of
Displays the running/stopped status of the PFC motors.
PFC1, PFC2, PFC3, PFC4, PFC5 and PFC6 always
correspond to the 1st...46th motor of the PFC system. If
76.74 Autochange auxiliary PFC
motors only, PFC1 represents the motor connected to the
drive and PFC2 the first auxiliary motor (the 2nd motor of the
system). If 76.74 is set to
PFC2 the 2nd. The drive can be connected to any of these
motors depending on the Autochange functionality.
Value
0 = Stop, 1 = Start
0 = Stop, 1 = Start
0 = Stop, 1 = Start
0 = Stop, 1 = Start
0 = Stop, 1 = Start
0 = Stop, 1 = Start
Status of the PFC relay outputs.
Displays the status of multipump system in text from.
This parameter provides a quick system overview, e.g. if the
parameter is added to the Home view on the control panel.
Displays the measured level.
This parameter is active when parameter
configuration is set to Level control - Emptying
control - Filling.
Measured level in meters.
Displays the measured level as a percentage of level control
operation area.
The signal is scaled to stop level 1 and full speed level.
Measured level in %.
Displays the level control speed reference.
Level control speed reference.
(page 60),
Level control (page 65).
configuration) and
motors).
auxiliary PFC is set to
All motors, PFC1 is the first motor,
76.21 Multipump
or
Def/FbEq16
Single
-
Aux
1 = 1
PFC disabled
Level
1 = 1 m
1 = 1 %
1 = 1 rpm