ABB ACQ580 Firmware Manual page 15

Term/abbreviation
FSCA-01
ID run
IGBT
Intermediate circuit
Inverter
I/O
IPC
L W ®
ON ORKS
LSW
NETA-21
Network control
Parameter
PFC
PID/Loop controller
PLC
PROFIBUS,
PROFIBUS DP,
PROFINET IO
PTC
R0, R1, ...
RO
Rectifier
SPFC
STO
Explanation
Optional RSA-485 adapter module
Motor identification run. During the identification run, the drive will
identify the characteristics of the motor for optimum motor control.
Insulated gate bipolar transistor
See DC link.
Converts direct current and voltage to alternating current and voltage.
Input/Output
Intelligent pump control
L W ® (local operating network) is a networking platform
ON ORKS
specifically created to address the needs of control applications.
Least significant word
Remote monitoring tool
With fieldbus protocols based on the Common Industrial Protocol
TM
(CIP ), such as DeviceNet and Ethernet/IP, denotes the control of the
drive using the Net Ctrl and Net Ref objects of the ODVA AC/DC Drive
Profile. For more information, see www.odva.org, and the following
manuals:
• FDNA-01 DeviceNet adapter module user's manual (3AFE68573360
[English]), and
• FENA-01/-11/-21 Ethernet adapter module user's manual
(3AUA0000093568 [English]).
User-adjustable operation instruction to the drive, or signal measured or
calculated by the drive
Single pump control
Proportional–integral–derivative controller. Drive speed control is based
on PID algorithm.
Programmable logic controller
Registered trademarks of PI - PROFIBUS & PROFINET International
Positive temperature coefficient, thermistor whose resistance is
dependent on temperature,
Frame (size)
Relay output; interface for a digital output signal. Implemented with a
relay.
Converts alternating current and voltage to direct current and voltage.
Soft pump control
Safe torque off. See chapter The Safe torque off function in the
Hardware manual of the drive.
Introduction to the manual 11