ABB ACQ580 Firmware Manual page 109

No. Name/Value
01.51 Previous hour kWh
0.00... 1000000.00
kWh
01.52 Current day kWh
0.00... 1000000.00
kWh
01.53 Previous day kWh
0.00... 1000000.00
kWh
01.54 Cumulative inverter
energy
-200000000.0...
200000000.0 kWh
01.55 Inverter GWh
counter (resettable)
0...65535 GWh
01.56 Inverter MWh
counter (resettable)
0...1000 MWh
01.57 Inverter kWh
counter (resettable)
0...1000 kWh
01.58 Cumulative inverter
energy (resettable)
-200000000.0...
200000000.0 kWh
Description
Previous hour energy consumption. The value
hour kWh is stored here when its values has been cumulated
for 60 minutes.
If the power is cycled, after the drive is again up and running,
the parameter value is set to the value it had before the power
cycle.
Energy.
Current day energy consumption. This is the energy of the
last 24 hours (not necessarily continuous) the drive has been
running, not the energy of a calendar day. T
If the power is cycled, after the drive is again up and running,
the parameter value is set to the value it had before the power
cycle.
Energy.
Previous day energy consumption. The value
day kWh is stored here when its value has been cumulated
for 24 hours.
If the power is cycled, after the drive is again up and running,
the parameter value is set to the value it had before the power
cycle.
Energy.
Amount of energy that has passed through the drive (in either
direction) in full kilowatt-hours. The minimum value is zero.
Energy in kWh.
Amount of energy that has passed through the drive (in either
direction) in full gigawatt-hours. The minimum value is zero.
You can reset the value by setting it to zero. Resetting any of
parameters 01.55...01.58
Energy in GWh.
Amount of energy that has passed through the drive (in either
direction) in full megawatt-hours. Whenever the counter rolls
over, 01.55 Inverter GWh counter (resettable)
The minimum value is zero.
You can reset the value by setting it to zero. Resetting any of
parameters 01.55...01.58
Energy in MWh.
Amount of energy that has passed through the drive (in either
direction) in full kilowatt-hours. Whenever the counter rolls
over, 01.56 Inverter MWh counter (resettable)
The minimum value is zero.
You can reset the value by setting it to zero. Resetting any of
parameters 01.55...01.58
Energy in kWh.
Amount of energy that has passed through the drive (in either
direction) in full kilowatt-hours. The minimum value is zero.
You can reset the value by setting it to zero. Resetting any of
parameters 01.55...01.58
Energy in kWh.
01.50 Current
01.52 Current
resets all of them.
is incremented.
resets all of them.
is incremented.
resets all of them.
resets all of them.
Parameters 105
Def/FbEq16
-
1 = 1 kWh
-
1 = 1 kWh
-
1 = 1 kWh
-
10 = 1 kWh
-
1 = 1 GWh
-
1 = 1 MWh
-
10 = 1 kWh
-
10 = 1 kWh