ABB ACQ580 Firmware Manual page 288
Pump control program
Hide thumbs
Also See for ACQ580:
- Quick start up manual (92 pages) ,
- Manual (5 pages) ,
- Electrical planning instructions (36 pages)
Table of Contents
Advertisement
284 Parameters
No.
Name/Value
96.10
User set status
n/a
Loading
Saving
Faulted
User1 IO active
User2 IO active
User3 IO active
User4 IO active
Reserved
User1 backup
User2 backup
User3 backup
User4 backup
96.11
User set save/load
No action
User set I/O mode
Load set 1
Load set 2
Load set 3
Load set 4
Reserved
Save to set 1
Save to set 2
Save to set 3
Save to set 4
Description
Shows the status of the user parameter sets.
This parameter is read-only.
See also section
User parameter sets
No user parameter sets have been saved.
A user set is being loaded.
A user set is being saved.
Invalid or empty parameter set.
User set 1 has been selected by parameters
I/O mode in1
and
96.13 User set I/O mode
User set 2 has been selected by parameters
I/O mode in1
and
96.13 User set I/O mode
User set 3 has been selected by parameters
I/O mode in1
and
96.13 User set I/O mode
User set 4 has been selected by parameters
I/O mode in1
and
96.13 User set I/O mode
User set 1 has been saved or loaded.
User set 2 has been saved or loaded.
User set 3 has been saved or loaded.
User set 4 has been saved or loaded.
Enables the saving and restoring of up to four custom sets of
parameter settings.
The set that was in use before powering down the drive is in
use after the next power-up.
Notes:
• Some hardware configuration settings, such as I/O
extension module and fieldbus configuration parameters
(groups 14...16, 47, 50...58 and 92...93) are not included
in user parameter sets.
• Parameter changes made after loading a set are not
automatically stored – they must be saved using this
parameter.
• This parameter cannot be changed while the drive is
running
Load or save operation complete; normal operation.
Load user parameter set using parameters
mode in1
and
96.13 User set I/O mode
Load user parameter set 1.
Load user parameter set 2.
Load user parameter set 3.
Load user parameter set 4.
Save user parameter set 1.
Save user parameter set 2.
Save user parameter set 3.
Save user parameter set 4.
(page 96).
96.12 User set
in2.
96.12 User set
in2.
96.12 User set
in2.
96.12 User set
in2.
96.12 User set I/O
in2.
Def/FbEq16
-
0
1
2
3
4
5
6
7
8...19
20
21
22
23
No action
0
1
2
3
4
5
6...17
18
19
20
21
Advertisement
Table of Contents
