Control Panel - ABB ACQ580 Firmware Manual

10 Introduction to the manual
Terms and abbreviations
Term/abbreviation
ACX-AP-x
AI
AO
Control board
CDPI-01
CCA-01
CHDI-01
CMOD-01
CMOD-02
CRC
DC link
DC link capacitors
DDCS
DI
DO
DPMP-01
DPMP-02/03
Drive
EFB
FBA
FCAN-01
FDNA-01
FENA-01/-11/-21
FLON-01
FPBA-01
Frame (size)
Explanation
Assistant control panel, advanced operator keypad for communication
with the drive.
The dedicated assistant control panel for the ACQ580 is ACH-AP-H
(Hand-Off-Auto panel).
The ACQ580 offers limited support of ACS-AP-I and ACS-AP-W. You
can use parameters and Primary settings menus with ACS-AP-I and
parameters and I/O with ACS-AP-W.
Analog input; interface for analog input signals
Analog output; interface for analog output signals
Circuit board in which the control program runs.
Communication adapter module
Configuration adapter
Optional 115/230 V digital input extension module
Optional multifunction extension module (external 24 V AC/DC and
digital I/O extension)
Optional multifunction extension module (external 24 V AC/DC and
isolated PTC interface)
Cyclic redundancy check. The IPC checks the parameter group validity
in terms of CRC.
DC circuit between rectifier and inverter
Energy storage which stabilizes the intermediate circuit DC voltage
Distributed drives communication system.
Digital input; interface for digital input signals
Digital output; interface for digital output signals
Mounting platform for ACX-AP control panel (flange mounting)
Mounting platform for ACX-AP control panel (surface mounting)
Frequency converter for controlling AC motors
Embedded fieldbus
Fieldbus adapter
Optional CANopen adapter module
Optional DeviceNet adapter module
Optional Ethernet adapter module for EtherNet/IP, Modbus TCP and
PROFINET IO protocols
L W ® adapter module
ON ORKS
Optional PROFIBUS DP adapter module
Refers to drive physical size, for example R0 and R1. The type
designation label attached to the drive shows the frame of the drive, see
chapter Operation principle and hardware description, section Type
designation label in the Hardware manual of the drive.