Fba A Settings - ABB ACQ580 Firmware Manual

244 Parameters
No. Name/Value
50.14 FBA A reference 1
-2147483648...
2147483647
50.15 FBA A reference 2
-2147483648...
2147483647
50.16 FBA A status word
00000000h...
FFFFFFFFh
50.17 FBA A actual value
1
-2147483648...
2147483647
50.18 FBA A actual value
2
-2147483648...
2147483647
51

51 FBA A settings

51.01 FBA A type
Description
Displays raw (unmodified) reference REF1 sent by the master
(PLC) to fieldbus adapter A if debugging is enabled by
parameter 50.12 FBA A debug
This parameter is read-only.
Raw REF1 sent by master to fieldbus adapter A.
Displays raw (unmodified) reference REF2 sent by the master
(PLC) to fieldbus adapter A if debugging is enabled by
parameter 50.12 FBA A debug
This parameter is read-only.
Raw REF2 sent by master to fieldbus adapter A.
Displays the raw (unmodified) status word sent by fieldbus
adapter A to the master (PLC) if debugging is enabled by
parameter 50.12 FBA A debug
This parameter is read-only.
Status word sent by fieldbus adapter A to master.
Displays raw (unmodified) actual value ACT1 sent by fieldbus
adapter A to the master (PLC) if debugging is enabled by
parameter 50.12 FBA A debug
This parameter is read-only.
Raw ACT1 sent by fieldbus adapter A to master.
Displays raw (unmodified) actual value ACT2 sent by fieldbus
adapter A to the master (PLC) if debugging is enabled by
parameter 50.12 FBA A debug
This parameter is read-only.
Raw ACT2 sent by fieldbus adapter A to master.
Fieldbus adapter A configuration.
Displays the type of the connected fieldbus adapter module.
0 = None. Module is not found or is not properly connected, or
is disabled by parameter
1 = PROFIBUS-DP
32 = CANopen
37 = DeviceNet
128 = Ethernet
132 = PROFInet IO
135 = EtherCAT
136 = ETH Pwrlink
485 = RS-485 comm
101 = ControlNet
2222 = Ethernet/IP
502 = Modbus/TCP
This parameter is read-only.
mode.
mode.
mode.
mode.
mode.
50.01 FBA A enable
Def/FbEq16
-
-
-
-
-
-
-
-
-
-
-