Table of Contents
Advertisement
8.5.2
Semi-automatic configuration mode
This mode can be used for a medium-sized project, e.g. a building which has not more than 32
floors above the ground floor. Please see the "Configure mode overview" chapter for more
details.
This mode can give you some freedom when configuring the settings.
User case 2
Question
Which floors need to support the
elevator control?
Where are the outdoor stations
installed?
Is the "call elevator from indoor
station" function needed?
The following steps below are based on the user case 2, please adjust the settings according to
the actual situation:
[1] On the "Settings" screen, select "Semi-automatic Configuration" from the drop-down list.
Product manual 2TMD041800D0042
Answer
-1, 1, 2, 3, 4, 5, 6
Outdoor station 1 is installed on floor 1
Outdoor station 2 is installed on floor -1
Yes
Commissioning
│22
Advertisement
Table of Contents
