ABB ACQ580 Firmware Manual page 172

168 Parameters
No. Name/Value
Control panel (ref
copied)
Level control
Other
28.15 Ext2 frequency ref1
Zero
AI1 scaled
AI2 scaled
Reserved
FB A ref1
FB A ref2
Reserved
EFB ref1
EFB ref2
Reserved
Motor
potentiometer
PID
Frequency input
Control panel (ref
saved)
Description
Panel reference (03.01 Panel
the previous control location is used as the reference when
the control location changes if the references for the two
locations are of the same type (eg
frequency/speed/torque/PID); otherwise, the actual signal is
used as the new reference.
Reference
Ext1 -> Ext2
Parameter 76.07 LC speed ref
function).
Source selection (see Terms and abbreviations
Selects Ext2 frequency reference source 1.
None.
12.12 AI1 scaled value
12.22 AI2 scaled value
03.05 FB A reference 1
03.06 FB A reference 2
03.09 EFB reference 1 (see page 107).
03.10 EFB reference 2 (see page 107).
22.80 Motor potentiometer ref act
potentiometer).
40.01 Process PID output actual
controller).
11.38 Freq in 1 actual value
input).
Panel reference (03.01 Panel
saved by the control system for the location where the control
returns is used as the reference.
Reference
Ext1 -> Ext2
reference, see page 106) for
Ext1 reference
Ext2 reference
Active reference
Inactive reference
t
(output of the Level control
(see page 125).
(see page 126).
(see page 106).
(see page 106).
(output of the motor
(output of the process PID
(when DI5 is used as a frequency
reference, see page 106)
Ext1 reference
Ext2 reference
Active reference
Inactive reference
t
Def/FbEq16
19
30
on page 100). -
Zero
0
1
2
3
4
5
6...7
8
9
10...14
15
16
17
18