ABB ACQ580 Firmware Manual page 119

No. Name/Value
06.22 Hand-off-auto
status word
Bit Name
0 Hand mode
1 Off mode
2 Auto mode
3 Reserved
4 Pre-heating
5 Damper control
6 Reserved
7 Run permissive
8 Start interlock 1
9 Start interlock 2
10 Start interlock 3
11 Start interlock 4
12...15 Reserved
0000h...FFFFh
06.30 MSW bit 11
selection
False
True
Ext ctrl loc
Other [bit]
06.31 MSW bit 12
selection
False
True
Run permissive
Other [bit]
06.32 MSW bit 13
selection
False
True
Other [bit]
06.33 MSW bit 14
selection
False
Description
ACQ580 specific status word.
This parameter is read-only.
Description
0 = Drive is not operated from the panel in the Hand mode; 1 =
Drive is operated from the panel in the Hand mode
0 = Drive is not in the Off mode; 1 = Drive is in the Off mode.
0 = Drive is not in the Auto mode; 1 = Drive is in the Auto mode.
0 = Motor pre-heating is not active; 1 = Motor pre-heating is
active.
0 = Damper control is not active; 1 = Damper control is active.
0 = Run permissive is not present, drive is not allowed to run; 1 =
Run permissive is present, drive is allowed to run.
0 = Start interlock 1 is not present, drive is not allowed to start;
1 = Start interlock 1 is present, drive is allowed to start.
0 = Start interlock 2 is not present, drive is not allowed to start;
1 = Start interlock 2 is present, drive is allowed to start.
0 = Start interlock 3 is not present, drive is not allowed to start;
1 = Start interlock 3 is present, drive is allowed to start.
0 = Start interlock 4 is not present, drive is not allowed to start;
1 = Start interlock 4 is present, drive is allowed to start.
Start inhibit status word.
Selects a binary source whose status is transmitted as bit 11
(User bit 0) of 06.11 Main status
0.
1.
Bit 11 of 06.01 Main control word
Source selection (see Terms and abbreviations
Selects a binary source whose status is transmitted as bit 12
(User bit 1) of 06.11 Main status
0.
1.
Status of the external run permissive signal (see parameter
20.40 Run permissive).
Source selection (see Terms and abbreviations
Selects a binary source whose status is transmitted as bit 13
(User bit 2) of 06.11 Main status
0.
1.
Source selection (see Terms and abbreviations
Selects a binary source whose status is transmitted as bit 14
(User bit 3) of 06.11 Main status
0.
Parameters 115
word.
(see page 111).
on page 100). -
word.
on page 100). -
word.
on page 100). -
word.
Def/FbEq16
-
1 = 1
Ext ctrl loc
0
1
2
Run
permissive
0
1
3
False
0
1
False
0