ABB ACQ580 Firmware Manual page 236

232 Parameters
No. Name/Value
45.02 Saved MW hours
0...999 MWh
45.03 Saved kW hours
0.0...999.9 kWh
45.04 Saved energy
0.0...214748364.0
kWh
45.05 Saved money
x1000
0...4294967295
thousands
45.06 Saved money
0.00...999.99 units
Description
Energy saved in MWh compared to direct-on-line motor
connection. This parameter is incremented when
Saved kW hours rolls over.
When this parameter rolls over, parameter
hours is incremented.
This parameter is read-only (see parameter
calculations reset).
Energy savings in MWh.
Energy saved in kWh compared to direct-on-line motor
connection.
If the internal brake chopper of the drive is enabled, all energy
fed by the motor to the drive is assumed to be converted into
heat, but the calculation still records savings made by
controlling the speed. If the chopper is disabled, then
regenerated energy from the motor is also recorded here.
When this parameter rolls over, parameter
hours is incremented.
This parameter is read-only (see parameter
calculations reset).
Energy savings in kWh.
Energy saved in kWh compared to direct-on-line motor
connection.
If the internal brake chopper of the drive is enabled, all energy
fed by the motor to the drive is assumed to be converted into
heat.
This parameter is read-only (see parameter
calculations reset).
Energy savings in kWh.
Monetary savings in thousands compared to direct-on-line
motor connection. This parameter is incremented when
Saved money rolls over.
If you have not set the currency during the first start-up, you
can specify it in Main menu - Primary settings - Clock,
region display - Units - Currency.
This parameter is read-only (see parameter
calculations reset).
Monetary savings in thousands of units.
Monetary savings compared to direct-on-line motor
connection. This value is a calculated by multiplying the
saved energy in kWh by the currently active energy tariff
(45.14 Tariff selection).
When this parameter rolls over, parameter
money x1000 is incremented.
If you have not set the currency during the first start-up, you
can specify it in Main menu - Primary settings - Clock,
region display - Units - Currency.
This parameter is read-only (see parameter
calculations reset).
Monetary savings.
Def/FbEq16
-
45.03
45.01 Saved GW
45.21 Energy
1 = 1 MWh
-
45.02 Saved MW
45.21 Energy
10 = 1 kWh
-
45.21 Energy
1 = 1 kWh
-
45.06
45.21 Energy
1 = 1 unit
-
45.05 Saved
45.21 Energy
1 = 1 unit