258 Parameters
No.
Name/Value
0...8
76.23
Master enable
Not selected
Selected
76.25
Number of motors
1...8
76.26
Min number of
motors allowed
0...8
76.27
Max number of
motors allowed
1...8
Description
IPC node number.
Selects if this pump operate as a master drive of the IPC
system. The master drive must have sensor connection in
order to control the process.
The drive can only be a follower on a inverter-to-inverter link.
The drive can be a master on a inverter-to-inverter link.
Total number of motors used in the application, including the
motor connected directly to the drive.
Note: Parameters are dynamically hidden based on selection
of number of motors.
Number of motors.
Minimum number of motors running simultaneously.
Minimum number of motors.
Maximum number of motors running simultaneously.
Maximum number of motors.
Def/FbEq16
Selected
1
1 = 1
1
1 = 1
1
1 = 1