ABB ACQ580 Firmware Manual page 246

242 Parameters
No. Name/Value
50.05 FBA A ref2 type
Speed or frequency Type and scaling is chosen automatically according to the
Transparent
General
Reserved
Speed
Frequency
50.06 FBA A SW sel
Auto
Transparent mode
50.07 FBA A actual 1 type
Speed or frequency Type and scaling is chosen automatically according to the
Transparent
General
Reserved
Speed
Frequency
Description
Selects the type and scaling of reference 2 received from
fieldbus adapter A. The scaling of the reference is defined by
parameters 46.01...46.04, depending on which reference
type is selected by this parameter.
currently active operation mode as follows:
Operation mode
(see par. 19.01)
Speed control
Frequency control
Please select Speed (selection 4) or Frequency (selection 5)
manually.
No scaling is applied.
Generic reference without a specific unit.
The scaling is defined by parameter
The scaling is defined by parameter
Selects the source of the Status word to be sent to the
fieldbus network through fieldbus adapter A.
Source of the Status word is chosen automatically.
The source selected by parameter
transparent source is transmitted as the Status word to the
fieldbus network through fieldbus adapter A.
Selects the type and scaling of actual value 1 transmitted to
the fieldbus network through fieldbus adapter A. The scaling
of the value is defined by parameters 46.01...46.04,
depending on which actual value type is selected by this
parameter.
currently active operation mode as follows:
Operation mode
(see par. 19.01)
Speed control
Frequency control
No scaling is applied.
Generic reference without a specific unit.
The scaling is defined by parameter
The scaling is defined by parameter
Reference 2 type
Speed
Frequency
46.01 Speed scaling.
46.02 Frequency scaling. 5
50.09 FBA A SW
Actual value 1 type
Speed
Frequency
46.01 Speed scaling.
46.02 Frequency scaling. 5
Def/FbEq16
Speed or
frequency
0
1
2
3
4
Auto
0
1
Speed or
frequency
0
1
2
3
4