ABB ACQ580 Firmware Manual page 106

102 Parameters
Group
50 Fieldbus adapter (FBA)
51 FBA A settings
52 FBA A data in
53 FBA A data out
58 Embedded fieldbus
71 External PID1
76 Multipump configuration
77 Multipump maintenance
and monitoring
80 Flow calculation and
protection
81 Sensor settings
82 Pump protections
83 Pump cleaning
95 HW configuration
96 System
97 Motor control
98 User motor parameters
99 Motor data
Contents
Fieldbus communication configuration.
Fieldbus adapter A configuration.
Selection of data to be transferred from drive to fieldbus controller
through fieldbus adapter A.
Selection of data to be transferred from fieldbus controller to drive
through fieldbus adapter A.
Configuration of the embedded fieldbus (EFB) interface.
Configuration of external PID.
Multipump configuration parameters.
Multipump maintenance and monitoring parameters.
Actual flow calculation.
Defines the sensor settings for inlet and outlet pressure protection
function.
Settings for quick ramp functions.
Settings for the pump cleaning sequence.
Various hardware-related settings.
Language selection; access levels; macro selection; parameter
save and restore; control unit reboot; user parameter sets; unit
selection.
Switching frequency; slip gain; voltage reserve; flux braking; anti-
cogging (signal injection); IR compensation.
Motor values supplied by the user that are used in the motor
model.
Motor configuration settings.
Page
240
244
246
246
247
254
256
267
269
273
274
277
280
281
287
291
292