Drive Configuration And Programming; Configuring Via Parameters - ABB ACQ580 Firmware Manual

42 Program features

Drive configuration and programming

The drive control program performs the main control functions, including speed and
frequency control, drive logic (start/stop), I/O, feedback, communication and
protection functions. Control program functions are configured and programmed with
parameters.


Configuring via parameters

Parameters configure all of the standard drive operations and can be set via
• the control panel, as described in chapter
• the Drive composer PC tool, as described in Drive composer user's manual
(3AUA0000094606 [English]), or
• the fieldbus interface, as described in chapters
embedded fieldbus interface (EFB)
adapter.
All parameter settings are stored automatically to the permanent memory of the drive.
However, if an external +24 V DC or 24 V AC power supply is used for the drive
control unit, it is highly recommended to force a save by using parameter
Parameter save manually
changes have been made.
If necessary, the default parameter values can be restored by parameter
Parameter restore.
Drive control program
Speed control
Frequency control
Drive logic
I/O interface
Fieldbus interface
Protections
before powering down the control unit after any parameter
Control panel
Fieldbus control through the
and Fieldbus control through a fieldbus
M
96.07
96.06