Keys - ABB ACQ580 Firmware Manual

Keys

The keys of the control panel are described below.
Left softkey
The left softkey (
situation is shown by the softkey selection in the bottom left corner of the display.
Holding down exits each view in turn until you are back in the Home view. This
function does not work in special screens.
Right softkey
The right softkey (
function of the right softkey in a given situation is shown by the softkey selection in
the bottom right corner of the display.
The arrow keys
The up and down arrow keys (
and selection lists, to scroll up and down on text pages, and to adjust values when,
for example, setting the time, entering a passcode or changing a parameter value.
The left and right arrow keys (
parameter editing and to move forward and backward in assistants. In menus,
function the same way as
Help
The help key ( opens a help page. The help page is context-sensitive, in other
? )
words, the content of the page is relevant to the menu or view in question.
Hand, Off and Auto
The ACQ580 can be in local or external control. The local control has two modes:
Hand and Off. See also the diagram in section
page 37.
Hand key ( ):
• In local control / Off mode: Starts the drive. The drive will switch to the Hand
mode.
• In external control: Switches the drive to local control / Hand mode, keeping it
running.
) is usually used for exiting and canceling. Its function in a given
) is usually used for selecting, accepting and confirming. The
and
and
and
) are used to highlight selections in menus
) are used to move the cursor left and right in
, respectively.
Local control vs. external control
Control panel 31
and
on